coating specification

How to Specify Optical Coatings Without Surprises (AR, HR, Beam Splitters & Filters) Many coating issues are not caused by “bad coating” but by incomplete specifications. Performance changes dramatically with wavelength range, angle of incidence (AOI), polarization, substrate material, and environmental conditions. This article provides a practical specification checklist to help your coating behave as expected in real use. Why coating performance changes Wavelength range: targets at 532 nm can differ from 400–700 nm broadband requirements AOI (angle): a coating designed at 0° may shift at 30° or 45° Polarization: S and P polarization can behave differently at higher AOI Substrate: material index and absorption affect achievable performance Environment: humidity/temperature cycles can influence durability requirements A coating specification checklist To avoid rework, include the following items in your inquiry or drawing notes: Optical function: AR / HR / beam splitter / filter type (bandpass, longpass, shortpass, ND, etc.) Wavelength range and targets: define passband/stopband or reflectance targets and bandwidth AOI: operating angle(s), not just “normal incidence” Polarization: unpolarized or specify S/P requirements Substrate: material and thickness (or allow supplier recommendation) Surface and cosmetic expectations: application-driven (imaging vs. industrial sensing differs) Durability: cleaning method, handling, and any environmental constraints Examples that reduce ambiguity Broadband AR: specify the wavelength range and max reflectance target at the operating AOI Beam splitter: specify split ratio, AOI, and polarization conditions Bandpass filter: specify center wavelength, FWHM, blocking range, and OD target (if needed) ND filter: specify optical density (OD) or transmission, and wavelength range What we recommend for faster projects If you are unsure about coating trade-offs, start with your application scenario and operating conditions. A short technical discussion upfront usually saves multiple sampling cycles later. Need a coating recommendation? Share your wavelength range, AOI, polarization, substrate preference (if any), and target performance. We can propose a practical specification and sampling plan.